| PART |
Description |
Maker |
| ADG540812 |
High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers
|
Analog Devices
|
| AD7592 AD7592DI AD7592DIBQ AD7592DIKN AD7592DIKP A |
Dual 5V SPDT Latch Up Proof Switch with Overvoltage Protection
DI CMOS ANALOG SWITCHES WITH DATA LATCHES QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, CDIP16
DI CMOS ANALOG SWITCHES WITH DATA LATCHES QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PQCC20
Quad ±15V SPST Latch Up Proof Switch with Overvoltage Protection
Dual ±15V SPDT Latch Up Proof Switch with Overvoltage Protection
|
Analog Devices, Inc.
AD[Analog Devices]
ANALOG DEVICES INC
|
| DHVR100F100KT26 DHVR100F100KT52 DHVR100J100KT52 DH |
Resistors High Voltage Flame Proof Resistors
High Voltage Flame Proof Resistors
Resistors High Voltage Flame Proof Resistors
|
Dubilier
|
| SPL00501031B SPL00501031MP SPL00501031RD SPL005010 |
Linear Position Sensor- IP65 Dust Proof, Water Proof (Intense Spray)
|
List of Unclassifed Manufacturers
ETC
|
| HCF4042 HCF4042B01 HCF4042M013TR HCF4042BEY HCF404 |
4000/14000/40000 SERIES, HIGH LEVEL TRIGGERED D LATCH, COMPLEMENTARY OUTPUT, PDSO16
QUAD CLOCKED D LATCH
QUAD CLOCKED "D" LATCH
QUAD CLOCKED "D" LATCH
|
STMicroelectronics
ST Microelectronics
|
| ATS266 ATS266PLAA ATS266PAA ATS266PLAB |
4 to 28 V, high voltage hall effect latch
|
Anachip Corp
ETC
|
| AH266Z4-AE1 AH266_07 AH266 AH266Z4-BE1 |
HIGH VOLTAGE HALL EFFECT LATCH
|
BCDSEMI
|
| US4881 |
CMOS Low Voltage High Sensitivity Latch
|
Micro Electronics
|
| US3881EUA-AAA-000-BU US3881KSE-AAA-000-RE US3881KU |
Hall Latch Low Voltage & High Sensitivity
|
Melexis Microelectronic...
|
| IW4042B IW4042BN |
Quad Clocked ??Latch High-Voltage Silicon-Gate CMOS
|
IK Semicon Co., Ltd
|
| TC1413 TC1413N TC1413NCOA TC1413NCOA713 TC1413NEUA |
3A High-Speed MOSFET Drivers
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin
|
http://
Microchip
|
